{"product_id":"cleco-xl-fabrication-kit","title":"Cleco XL Fabrication Kit - 20 x 1\/8\" \u0026 20 x 3\/16\" Fasteners, 4 Brass Side Grip Clamps, 8 Butt Weld Clamps \u0026 Pliers","description":"\u003cp\u003eTwenty 1\/8\" and twenty 3\/16\" cleco fasteners, four brass side grip clamps, eight butt welding clamps and the pliers that drive the fasteners and the side grips. Twice the fasteners of our Metal Fabrication Kit, for kit cars, race cars, trailers and hot rod work.\u003c\/p\u003e\n\u003cp\u003eThe cleco fasteners are spring loaded temporary rivets. Drill a #30 (3.2 mm) hole for the 1\/8\" fasteners or a #10 (4.8 mm) hole for the 3\/16\", compress a cleco in the pliers, push it in and release. It pulls the sheets together and holds them until you take it out again.\u003c\/p\u003e\n\u003cp\u003eThe side grip clamps use the same pliers and need no hole. Compress the pliers to open the jaws, set the clamp over the panel edge or flange, and release. Brass clamps open to 3\/4\", enough for thicker stacks and folded edges, and grip without marking or overtightening.\u003c\/p\u003e\n\u003cp\u003eThe butt welding clamps hold two panels edge to edge and level for a butt joint. Slide one over both edges, wind it closed until the faces sit flush, tack between the clamps, then remove them and finish the weld. Everything in the kit is reusable.\u003c\/p\u003e","brand":"Cleco","offers":[{"title":"Default Title","offer_id":45897787474029,"sku":"ATM286-XL","price":308.51,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/ATM286-XL.webp?v=1790341062","url":"https:\/\/www.pilotgear.com.au\/ar-ae\/products\/cleco-xl-fabrication-kit","provider":"Pilot Gear","version":"1.0","type":"link"}