{"product_id":"crimp-tool-standard-adjustable-indent-m22520-1-01","title":"CRIMP TOOL | Standard Adjustable Indent (M22520\/1-01)","description":"\u003cp\u003eThe DMC AF8, qualified to MIL-DTL-22520\/1* and AS22520\/1*, has virtually limitless application within the specified wire range of \u003cstrong\u003e12\u003c\/strong\u003e through \u003cstrong\u003e26 AWG\u003c\/strong\u003e. Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact\/wire combination. The 8 impression crimp, which is standard in the AF8, assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request.\u003c\/p\u003e\n\u003cp\u003eFor proper operation, the tool must be mated with one of the following optional accessories: a military standard or non-military turret head (TH-XXX Part No. Series), a military standard or non-military positioner (TP-XXX Part No. Series), or an adjustable head (Part No. UH2-5). This is done simply by orienting the head in the keyed position, and by tightening the hex socket screws provided as part of the head. \u003c\/p\u003e\n\u003cp\u003eThe precision ratchet controls cycling of the tool in both directions of handle movement. This assures the same accurate crimp every time. It's like having a quality control inspector at every work station. Positive crimp depth is controlled by an 8 position selector knob conveniently located on the tool frame. The operator simply dials the desired step for the wire being used. This setting can be secured by use of a locking pin or safety wire. \u003c\/p\u003e\n\u003cp\u003eA permanent dataplate is affixed to all turret heads and positioners. This plate lists specific contact part numbers, the corresponding position colour code (for 3 position turret heads), and suggested selector depth settings for the wire size being used.\u003c\/p\u003e\n\u003cp\u003eThe AF8 is approximately 9.75\" x 2.5\" x 1.25\" and weighs 15 oz. \u003c\/p\u003e\n\u003cp\u003ePeriodic gaging is recommended to insure accurate calibration. This can be done easily by setting the tool selector knob to position #4, and checking indenter closure with the M22520\/3-1 Go\/No-Go gage (DMC part no. G125). For a complete set of non-Mil-Spec Go\/No Go gages for all selector settings, see DMC part no. 88-100. \u003c\/p\u003e\n\u003cp\u003eOther than keeping the unit clean and properly stored when not in service, no operator maintenance is required. DMC offers complete factory service by knowledgeable technicians within a reasonable turnaround time. Complete instructions concerning the use, care and warranty are supplied with each tool.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12 - 26 AWG Wire Range\u003c\/li\u003e\n\u003cli\u003eQualified to MIL-DTL-22520\/1 and AS22520\/1\u003c\/li\u003e\n\u003cli\u003eAccommodates Daniels single and multiple position turret heads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pilot Gear","offers":[{"title":"Default Title","offer_id":45341113450605,"sku":"AF8","price":2475.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/GetImageNoResize_51cc9315-775b-4fa7-952d-06df1fa5072c.jpg?v=1781495231","url":"https:\/\/www.pilotgear.com.au\/de\/products\/crimp-tool-standard-adjustable-indent-m22520-1-01","provider":"Pilot Gear","version":"1.0","type":"link"}