{"product_id":"drill-stop-30","title":"Drill Stop #30 (1\/8\") - Spring Loaded Depth Stop for Sheet Metal Drilling, Copper","description":"\u003cp\u003eThis drill stop fits #30 drill bits (0.1285\" \/ 3.26 mm), the standard drill for 1\/8\" rivets and 1\/8\" clecos. If you only buy one drill stop, make it this one: #30 is the hole you drill more of than any other on an aluminium airframe. The copper spring matches the colour of our \u003ca href=\"\/el-gr\/products\/1-8-cleco\"\u003e1\/8\" C Series clecos\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eA drill stop is a spring loaded depth stop that locks onto the shank of the bit with a hex socket set screw. Only the length of drill you leave exposed can enter the work, so the bit cannot go any deeper than you set it. As you reach depth, the rounded steel nose settles on the panel and the coil spring takes the lunge out of the breakthrough, instead of letting the chuck slam into the skin.\u003c\/p\u003e\u003cp\u003eWhen you are drilling a few hundred #30 holes in a session, the stop pays for itself the first time it keeps the chuck off a freshly primed skin, or stops the bit short of a cable run, a wiring loom or the far side of a tank. It also takes the snatch out of the breakthrough that breaks bits and leaves ragged holes.\u003c\/p\u003e","brand":"Pilot Gear","offers":[{"title":"Default Title","offer_id":45872043491437,"sku":"CDS-30","price":2.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/CDS-30-83682607469.webp?v=1789646483","url":"https:\/\/www.pilotgear.com.au\/el-gr\/products\/drill-stop-30","provider":"Pilot Gear","version":"1.0","type":"link"}