{"title":"Wholesale — Consumables","description":null,"products":[{"product_id":"mobilgrease-28-synthetic-aircraft-grease-380gm-cartridges-10-pack","title":"MobilGrease 28 Synthetic Aircraft Grease 380gm Cartridges (10 Pack)","description":"\u003cp\u003eDesigned for plain and rolling bearings, splines, screws, worm gears and other mechanisms where high-friction reduction, low-wear and low-lubricant friction losses are required. Meets the specifications of MIL-PRF-81322G; DOD-G-24508A, Amendment 4; and NATO G-395.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh viscosity index (VI) synthetic base stock with no wax content\u003c\/li\u003e\n\u003cli\u003eExcellent protection against wear and corrosion\u003c\/li\u003e\n\u003cli\u003eExtreme-pressure protection characteristics\u003c\/li\u003e\n\u003cli\u003eAllows wide operating temperature range – outstanding high and low temperature performance\u003c\/li\u003e\n\u003cli\u003eProvides thicker fluid films protecting against wear of equipment parts operating at high temperature\u003c\/li\u003e\n\u003cli\u003eSuperb bearing protection and helps extend bearing life and reduce bearing replacement costs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplications:\u003c\/p\u003e\n\u003cp\u003eMobilgrease 28 is designed for the lubrication of plain and rolling bearings at low to high speeds, and splines, screws, worm gears, and other mechanisms where high friction reduction, low wear, and low lubricant friction losses are required. The recommended operating temperature range is -54ºC to 177ºC (-65ºF to 350ºF) with appropriate relubrication intervals.\u003c\/p\u003e\n\u003cp\u003eMobilgrease 28 is recommended for use in landing wheel assemblies, control systems and actuators, screw jacks, servo devices, sealed-bearing motors, oscillating bearings, and helicopter rotor bearings on military and civil aircraft. Subject to equipment manufacturer approvals, it can also be used on naval shipboard auxiliary machinery and where superseded specifications MIL-G-81322 (WP), MIL-G-7711A, MIL-G-3545B, and MIL-G-25760A are recommended. Mobilgrease 28 is also recommended for industrial lubrication, including sealed or repackable ball and roller bearings wherever extreme temperature conditions, high speeds, or water washing resistance are factors. Typical industrial applications include conveyor bearings, small alternator bearings operating at temperatures near 177ºC (350ºF), high-speed miniature ball bearings, and bearing applications where oscillatory motion, and vibration create problems. Mobilgrease 28 is qualified by the U.S. Military under Specification MIL-PRF-81322, General-Purpose, Aircraft, and Specification DOD-G-24508A (Navy) for shipboard auxiliary machinery. It is a U.S. Military Symbol WTR and NATO Code Number G-395 grease.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMIL-PRF-81322G\u003c\/li\u003e\n\u003cli\u003eDOD-G-24508A, Amendment 4\u003c\/li\u003e\n\u003cli\u003eNATO G-395\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ExxonMobil","offers":[{"title":"Default Title","offer_id":42660349673581,"sku":"121968-10","price":445.96,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/13bd2b8e-MOBIL28qty10box.jpg?v=1752107664"},{"product_id":"mobilgrease-28-synthetic-aircraft-grease-5-pack","title":"MobilGrease 28 Synthetic Aircraft Grease (5 Pack)","description":"\u003cp\u003eDesigned for plain and rolling bearings, splines, screws, worm gears and other mechanisms where high-friction reduction, low-wear and low-lubricant friction losses are required. Meets the specifications of MIL-PRF-81322G; DOD-G-24508A, Amendment 4; and NATO G-395.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh viscosity index (VI) synthetic base stock with no wax content\u003c\/li\u003e\n\u003cli\u003eExcellent protection against wear and corrosion\u003c\/li\u003e\n\u003cli\u003eExtreme-pressure protection characteristics\u003c\/li\u003e\n\u003cli\u003eAllows wide operating temperature range – outstanding high and low temperature performance\u003c\/li\u003e\n\u003cli\u003eProvides thicker fluid films protecting against wear of equipment parts operating at high temperature\u003c\/li\u003e\n\u003cli\u003eSuperb bearing protection and helps extend bearing life and reduce bearing replacement costs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplications:\u003c\/p\u003e\n\u003cp\u003eMobilgrease 28 is designed for the lubrication of plain and rolling bearings at low to high speeds, and splines, screws, worm gears, and other mechanisms where high friction reduction, low wear, and low lubricant friction losses are required. The recommended operating temperature range is -54ºC to 177ºC (-65ºF to 350ºF) with appropriate relubrication intervals.\u003c\/p\u003e\n\u003cp\u003eMobilgrease 28 is recommended for use in landing wheel assemblies, control systems and actuators, screw jacks, servo devices, sealed-bearing motors, oscillating bearings, and helicopter rotor bearings on military and civil aircraft. Subject to equipment manufacturer approvals, it can also be used on naval shipboard auxiliary machinery and where superseded specifications MIL-G-81322 (WP), MIL-G-7711A, MIL-G-3545B, and MIL-G-25760A are recommended. Mobilgrease 28 is also recommended for industrial lubrication, including sealed or repackable ball and roller bearings wherever extreme temperature conditions, high speeds, or water washing resistance are factors. Typical industrial applications include conveyor bearings, small alternator bearings operating at temperatures near 177ºC (350ºF), high-speed miniature ball bearings, and bearing applications where oscillatory motion, and vibration create problems. Mobilgrease 28 is qualified by the U.S. Military under Specification MIL-PRF-81322, General-Purpose, Aircraft, and Specification DOD-G-24508A (Navy) for shipboard auxiliary machinery. It is a U.S. Military Symbol WTR and NATO Code Number G-395 grease.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMIL-PRF-81322G\u003c\/li\u003e\n\u003cli\u003eDOD-G-24508A, Amendment 4\u003c\/li\u003e\n\u003cli\u003eNATO G-395\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ExxonMobil","offers":[{"title":"Default Title","offer_id":42660349837421,"sku":"121968-5","price":222.98,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/a4ac0cee-MOBIL28qty5.jpg?v=1752107664"},{"product_id":"dupont-molykote-z-powder-283g-10-oz","title":"Dupont Molykote Z Powder - 283g \/ 10 OZ","description":"\u003cp\u003eMolykote Z Powder can be used as a dry burnished (rubbed-on) lubricating film for metallic contacts, as a solid lubricant additive for self-lubricating plastics and sintered metal parts.\u003c\/p\u003e\n\u003cp\u003eIt works as a solid lubricant additive in metalworking compounds and as a solid lubricant additive in brake lining application. It can be used as a run-in aid, in press-fittings, in Heavy Load - slow speed applications. To use, Rub the powder thoroughly in different directions on degreased dry surfaces using a hard brush or window leather. Can be applied by rotary brush, felt or polishing disks. Small parts should preferably be tumble coated. Add to plastic elastomers and sinter metals before forming. As always, please read the manufacturers product information before using.\u003c\/p\u003e","brand":"Dupont","offers":[{"title":"Default Title","offer_id":42660350853229,"sku":"M04019599","price":254.15,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/e08bcf61-molykote.jpg?v=1752107664"},{"product_id":"dowsil-rtv732-silicone-multi-purpose-sealant-139ml-4-7oz-clear-white-black","title":"DOWSIL RTV732 Silicone Multi-Purpose Sealant - 139mL (4.7oz) - Clear, White \u0026 Black","description":"\u003cp\u003eDOWSIL (formerly Dow Corning) RTV732 is a high-performance, one-part acetoxy silicone sealant designed for general-purpose sealing and bonding applications. It cures at room temperature when exposed to moisture in the air, forming a tough, flexible rubber with excellent adhesion to a variety of substrates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcetoxy Cure System\u003c\/strong\u003e – Ensures a strong, durable bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Sag, Paste Consistency\u003c\/strong\u003e – Easy to apply and holds its shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Dielectric Properties\u003c\/strong\u003e – Suitable for electrical applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Temperature Stability\u003c\/strong\u003e – Remains flexible and stable from \u003cstrong\u003e-60°C to 177°C\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Adhesion\u003c\/strong\u003e – Bonds effectively to metals, glass, ceramics, plastics, rubber, painted surfaces, and non-oily wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather \u0026amp; Chemical Resistant\u003c\/strong\u003e – Withstands moisture, UV exposure, vibration, and temperature extremes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNSF Certified\u003c\/strong\u003e – Safe for applications requiring compliance with \u003cstrong\u003eNSF Standard 51 \u0026amp; 61\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Industrial Sealing \u0026amp; Bonding\u003c\/strong\u003e – Ideal for manufacturing, construction, and repairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing Flashing, Vents, Flues \u0026amp; Gutters\u003c\/strong\u003e – Provides long-lasting protection against the elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine \u0026amp; Automotive Use\u003c\/strong\u003e – Suitable for sealing windows, cabins, and other exposed areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical \u0026amp; HVAC Applications\u003c\/strong\u003e – Used for sealing electrical boxes, ductwork, and sheet metal stacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood-Related Applications\u003c\/strong\u003e – Meets \u003cstrong\u003e21 CFR 177.2600\u003c\/strong\u003e standards for incidental food contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 139mL (4.7 U.S. FL OZ) Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors Available:\u003c\/strong\u003e Clear, White, Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Time:\u003c\/strong\u003e Tack-free in 20 minutes, full cure in 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile Strength:\u003c\/strong\u003e 2.3 MPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e MIL-A-46106, 21 CFR 177.2600, NSF 51 \u0026amp; 61, UL Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDOWSIL RTV732 provides a reliable, long-lasting seal in demanding environments. Whether you're working on industrial projects, home repairs, or electrical sealing, this multi-purpose silicone is a trusted choice for professionals.\u003c\/p\u003e","brand":"Dow","offers":[{"title":"Clear","offer_id":42660357537901,"sku":"RTV732-50ZCLR","price":24.07,"currency_code":"AUD","in_stock":false},{"title":"White","offer_id":42660357570669,"sku":"RTV732-50ZWHI","price":24.07,"currency_code":"AUD","in_stock":false},{"title":"Black","offer_id":42660357603437,"sku":"RTV732-50ZBLK","price":24.07,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/c0a03c21-DMK140_83682607469.webp?v=1752107681"},{"product_id":"lubriplate®-630-aa-lithium-grease-tube-multi-purpose-10-oz-284g","title":"LUBRIPLATE® 630-AA Lithium Grease Tube – Multi-Purpose, 10 oz (284g)","description":"\u003cp\u003eLUBRIPLATE® 630-AA is a versatile lithium-based grease designed for dependable, all-purpose lubrication. It creates a durable protective film on working surfaces, reducing wear and ensuring smooth operation under a wide range of conditions. With strong resistance to moisture, rust, and corrosion, it’s ideal for aircraft maintenance tasks including controllable pitch propellers, wheel bearings, magnetos, and general-purpose greasing.\u003c\/p\u003e\n\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater resistant\u003c\/li\u003e\n\u003cli\u003eHigh anti-wear for extra lubricity\u003c\/li\u003e\n\u003cli\u003eOxidation inhibited\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGrease Type:\u003c\/b\u003e Lithium\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNLGI Grade:\u003c\/b\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eViscosity @ Temp. (Nom):\u003c\/b\u003e 750.0 SUS @ 100.0°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrop Point (ASTM):\u003c\/b\u003e 380°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColor:\u003c\/b\u003e Tan\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpecific Gravity:\u003c\/b\u003e 0.9400 [Min], 0.9500 [Max]\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThickener:\u003c\/b\u003e Lithium\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOdor\/Scent:\u003c\/b\u003e Mineral Oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePhysical Form:\u003c\/b\u003e Paste or Gel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"513\" data-start=\"495\"\u003eFilm Strength:\u003c\/strong\u003e Exceptional high film strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"567\" data-start=\"549\"\u003eMelting Point:\u003c\/strong\u003e 340°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications:\u003c\/b\u003e Multi-Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eResistance:\u003c\/b\u003e Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUNSPSC:\u003c\/b\u003e 15121902\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lubriplate","offers":[{"title":"Default Title","offer_id":42660358619245,"sku":"630AA100Z","price":65.73,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/96cf8ebc-630AA100Z_83682607469.webp?v=1752107684"},{"product_id":"lubriplate®-130-aa-calcium-grease-tub-15-oz-425g","title":"LUBRIPLATE® 130-AA Calcium Grease Tub - 15 oz (425g)","description":"\u003cp\u003eLUBRIPLATE No’s. 130-A \u0026amp; 130-AA are designed for those applications where a grease-type lubricant possessing extremely good water repellency and superior lubrication characteristics are desired. These products are recommended for plain bearings, cams, guides, open gears, slides and chassis lubrication and where temperatures do not exceed 170°F.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFluid Type:\u003c\/b\u003e mineral\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eISO Viscosity Grade of Base Oil:\u003c\/b\u003e 150\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNLGI Grade:\u003c\/b\u003e 2-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThickener:\u003c\/b\u003e Calcium\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFood Grade - NSF H1:\u003c\/b\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColor:\u003c\/b\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDropping Point (F°):\u003c\/b\u003e 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDropping Point (C°):\u003c\/b\u003e 93\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperating Temp Range (°F):\u003c\/b\u003e -10 to 170\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lubriplate","offers":[{"title":"Default Title","offer_id":42660358750317,"sku":"130AA160Z","price":61.81,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/90ca5730-130AA160Z_83682607469.webp?v=1752107684"},{"product_id":"molykote-111-silicone-o-ring-valve-grease-150g-5-3-oz-dupont","title":"Molykote 111 Silicone O-Ring \u0026 Valve Grease 150g \/ 5.3 oz – DuPont","description":"\u003cp\u003eSeals and lubricates in vacuum and pressure systems. Low volatility, non-melting, and resistant to water and chemicals. Net weight: 150g \/ 5.3 oz. Made in the USA.\u003c\/p\u003e","brand":"Molykote","offers":[{"title":"Default Title","offer_id":42660360093805,"sku":"DC111-50Z","price":56.64,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/88c58a18-4109788_83682607469_A.webp?v=1752107687"},{"product_id":"polyken-double-coated-carpet-tape","title":"Polyken 108FR Double-Coated Flame Retardant Carpet Tape","description":"\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlame-retardant construction complies with F.A.R. 25.853 (a)\u003c\/li\u003e\n\u003cli\u003eHand tearable for ease of installation\u003c\/li\u003e\n\u003cli\u003eHigh-strength with quick-stick and high adhesion\u003c\/li\u003e\n\u003cli\u003eHigh conformability\u003c\/li\u003e\n\u003cli\u003eFlexible design allows for ease of realignment\u003c\/li\u003e\n\u003cli\u003eAccommodates irregular surfaces\u003c\/li\u003e\n\u003cli\u003ePerforms without twisting or curling\u003c\/li\u003e\n\u003cli\u003eRemoves easily without leaving residue\u003c\/li\u003e\n\u003cli\u003eComplies with safety requirements\u003c\/li\u003e\n\u003cli\u003eImmediate carpet bond with retained bond integrity\u003c\/li\u003e\n\u003cli\u003eTrusted by Boeing, Douglas, Lockheed, major national and international airlines, and refurbishers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eASTM D1000 Specified\u003c\/li\u003e\n\u003cli\u003eAirbus ABD0031 Para 7.4\u003c\/li\u003e\n\u003cli\u003eFAR 25.853 (a) Approved\u003c\/li\u003e\n\u003cli\u003eBoeing BMS 5-133, BAC5034-4 Sec 5.1a(1)(b)\u003c\/li\u003e\n\u003cli\u003eBombardier DSC 91-8-1 \/ DSC 91-8-2\u003c\/li\u003e\n\u003cli\u003eDouglas DMS 1971\u003c\/li\u003e\n\u003cli\u003eEmbraer MEP 06-048\u003c\/li\u003e\n\u003cli\u003eFokker FK05-121, FK05-197\u003c\/li\u003e\n\u003cli\u003eLockheed LAC C-24-1257\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: 108FR\u003c\/li\u003e\n\u003cli\u003eLength: 25 yd (22.9 m)\u003c\/li\u003e\n\u003cli\u003eWidth: 2 in (50.8 mm)\u003c\/li\u003e\n\u003cli\u003eThickness: 15 mil (0.38 mm)\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eBacking Type: Cloth\u003c\/li\u003e\n\u003cli\u003eAdhesive Type: Natural Rubber\u003c\/li\u003e\n\u003cli\u003eLiner Color: Blue\u003c\/li\u003e\n\u003cli\u003eTemperature Rating: 40 to 200 °F (4 to 93 °C)\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 55 in-lb (6.2 N·m)\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 13 oz\/sq-yd (440 g\/m²)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Polyken","offers":[{"title":"Default Title","offer_id":43285202796653,"sku":"P0LYKEN108BLK","price":71.13,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/108FR-2-BLK.webp?v=1757476657"},{"product_id":"moldex-softies-6600-box","title":"Moldex Softies Orange Foam Earplugs 6600 – Disposable, Uncorded, 200 Pairs","description":"\u003cp\u003eMoldex Softies® Disposable Earplugs provide exceptional hearing protection with maximum comfort. With the highest independently tested NRR of 33, these earplugs offer superior noise reduction for demanding environments. Their radiant orange colour ensures easy visibility for quick compliance checks.\u003c\/p\u003e\n\u003cp\u003eCrafted from extra-soft, low-pressure foam, Softies® mold gently to your ear for a comfortable and secure fit, even in very small ear canals. The tapered shape allows for easy insertion and removal, while the smooth, non-irritating surface ensures all-day comfort without ear canal irritation.\u003c\/p\u003e\n\u003cp\u003eDesigned to be eco-friendly, Softies® are 100% PVC-Free, including both the earplugs and packaging, providing a greener alternative without compromising performance. Each uncorded earplug is individually packaged, with a total of 200 pairs per box, keeping them hygienic and ready to use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSofties Advantages:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSoft Comfortable Fit: Extra-soft, lightweight foam with a tapered shape that seals gently in the ear canal. Smooth surface prevents irritation.\u003c\/li\u003e\n\u003cli\u003eEasy Compliance Checks: Radiant orange color allows supervisors to easily verify proper use.\u003c\/li\u003e\n\u003cli\u003eIndependently Tested NRRs: Tested to ANSI S3.19-1974, ensuring top-tier industrial noise protection.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Moldex","offers":[{"title":"Default Title","offer_id":43316333772909,"sku":"6600","price":91.35,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/250230.webp?v=1758516489"},{"product_id":"prekote-surface-pretreatment-1-gallon-jug","title":"PreKote Surface Pretreatment – 1 Gallon Jug","description":"\u003cp\u003ePreKote is a non-chrome surface pretreatment utilising a safe, hazard-free technology for use in the painting and coating industries. PreKote offers superior adhesion, improved paint flexibility, and advanced corrosion protection on painted surfaces when used as part of a coating system.\u003c\/p\u003e\n\u003cp\u003ePreKote replaces the use of both chromate and non-chromate conversion coating systems, replacing acid etches, solvent washes, and other toxic substances on metal and composite substrates prior to priming and painting for many applications. Also used as an adhesion promoter for metal to metal bonding, PreKote is a flexible surface pretreatment which can be adapted to virtually any paint or bonding process including large surface area paint jobs, immersion processes, and touch-up applications. PreKote Surface Pretreatment works on aluminium, composite, steel, magnesium, and titanium surfaces.\u003c\/p\u003e\n\u003cp\u003ePreKote is a non-chrome surface pretreatment product and is nontoxic, non-hazardous, non-flammable, non-corrosive, CFC free, ODS free, odor free, and readily biodegradable upon disposal. PreKote does not require additional HAZMAT shipping charges and can reduce rinse water usage and potentially eliminate wastewater treatment from many processes.\u003c\/p\u003e\n\u003cp\u003eQualifies to AMS-3095A.\u003c\/p\u003e\n\u003cp\u003eNSN: 6850015138586\u003c\/p\u003e","brand":"Socomore","offers":[{"title":"Default Title","offer_id":43509999698029,"sku":"P065-1030","price":178.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/065-1030.webp?v=1759399627"},{"product_id":"lps-2-heavy-duty-lubricant-20oz-spray-bottle","title":"LPS 2 Heavy-Duty Lubricant – 20oz Spray Bottle","description":"\u003cp\u003eLPS 2 Heavy-Duty Lubricant provides a nondrying, oily film for long-lasting lubrication and corrosion protection. Ideal for use on tools, machinery, and steel components, it offers reliable performance in demanding industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNondrying, oily film for long lasting lubrication\u003c\/li\u003e\n\u003cli\u003eProtects against corrosion on steel parts indoors for up to one year\u003c\/li\u003e\n\u003cli\u003eExcellent protection for hand\/machine tools\u003c\/li\u003e\n\u003cli\u003eDoes not contain chlorinated solvents or silicones\u003c\/li\u003e\n\u003cli\u003eAvailable in trigger and bulk sizes. Meets Lockheed Martin EPSN G39.04\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications and Approvals:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComair\u003c\/li\u003e\n\u003cli\u003ePratt \u0026amp; Whitney Canada CPMC 79256 Rev.C\u003c\/li\u003e\n\u003cli\u003eUPS M-5100-2780-B\u003c\/li\u003e\n\u003cli\u003eMIL-C-16173D Grade 3\u003c\/li\u003e\n\u003cli\u003eMIL-C-81309D Type III\u003c\/li\u003e\n\u003cli\u003eMIL-C-16173D Class 2, Grade 3, para. 3.4–3.5\u003c\/li\u003e\n\u003cli\u003eCalled for in Raytheon Service Bulletin 27-3472\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNSN:\u003c\/strong\u003e 8030-00-838-7789\u003c\/p\u003e","brand":"LPS","offers":[{"title":"Default Title","offer_id":43528634630253,"sku":"L00222","price":57.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/00222_d0e75eed-f533-4635-9631-1d145f91e252.webp?v=1759985621"},{"product_id":"mobil-jet-oil-ii-carton","title":"Mobil Jet Oil II – Carton of 24 Quarts","description":"\u003cp\u003eThis legendary, hassle-free, second-generation oil helps keep engines clean and operating at peak efficiency. Approved against the MIL-PRF-23699, recommended for use in aircraft turbines.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent thermal and oxidation stability\u003c\/li\u003e\n\u003cli\u003eExcellent wear and corrosion protection\u003c\/li\u003e\n\u003cli\u003eRetains viscosity and film strength across wide temperature range\u003c\/li\u003e\n\u003cli\u003eReduces the formation of carbon and sludge deposits and maintains engine efficiency and extends engine life\u003c\/li\u003e\n\u003cli\u003eExtends gear and bearing life and reduces engine maintenance\u003c\/li\u003e\n\u003cli\u003eProvides effective lubrication at high operating temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMobil Jet™ Oil II is recommended for aircraft gas turbine engines of the turbo-jet, turbo-fan, turbo-prop, and turbo-shaft (helicopter) types in commercial and military service. It is also recommended for aircraft-type gas turbine engines used in industrial or marine applications.\u003c\/p\u003e\n\u003cp\u003eMobil Jet™ Oil II is approved against the Standard Performance (STD) classification of U.S. Military Specification MIL-PRF-23699. It is also compatible with other synthetic gas turbine lubricants meeting MIL-PRF-23699. However, mixing with other products is not recommended because the blend would result in some loss of the performance characteristics of Mobil Jet™ Oil II. Mobil Jet™ Oil II is compatible with all metals used in gas turbine construction, as well as with F Rubber (Viton A), H Rubber (Buna N), and silicone seal materials.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMil-PRF-23699F-STD\u003c\/li\u003e\n\u003cli\u003ePRI-QPL-AS5780\/SPC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ExxonMobil","offers":[{"title":"Default Title","offer_id":43877704269933,"sku":"M0BILJETIIQT-24","price":918.53,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/M0BILJETIIQT-24.webp?v=1768478333"},{"product_id":"phillips-66-victory-aviation-motor-oil-100aw-sae-50-case-of-12-quarts","title":"Phillips 66 Victory Aviation Motor Oil 100AW SAE 50 - Case of 12 Quarts","description":"\u003cp\u003eASHLESS DISPERSANT, SINGLE-GRADE ENGINE OIL WITH ANTIWEAR ADDITIVE FOR AIRCRAFT PISTON ENGINES\u003c\/p\u003e\n\u003cp\u003ePhillips 66® Victory Aviation Oil 100AW is an ashless dispersant, single-grade engine oil pre-blended with the proper concentration of antiscuff\/antiwear additive (LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It is recommended for use in opposed piston and radial piston aircraft engines where cam lifter wear is a concern.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAshless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine\u003c\/li\u003e\n\u003cli\u003ePre-blended with Lycoming-approved antiwear additive\u003c\/li\u003e\n\u003cli\u003eHigh film strength for protection against wear and piston scuffing\u003c\/li\u003e\n\u003cli\u003eHigh viscosity index and low pour point for use over a wide temperature range\u003c\/li\u003e\n\u003cli\u003eProtects against rust and corrosion\u003c\/li\u003e\n\u003cli\u003eFormulated with the same high-quality base oils as used in Phillips 66 X\/C\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003eAviation Oil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phillips 66","offers":[{"title":"Default Title","offer_id":44975652241517,"sku":"1059152-CASE","price":191.88,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/1059152-CASE.webp?v=1775113829"},{"product_id":"mobilgrease-28-synthetic-aircraft-grease-red-16-kg-pail","title":"Mobil Grease 28 Synthetic Aircraft Grease Red, 16 kg pail","description":"\u003cp\u003eThis synthetic aircraft grease is formulated for high-friction applications, including bearings and gears, offering low wear and friction losses. It meets military and NATO specifications, features a high viscosity index, and provides excellent protection against wear and corrosion, ensuring reliable performance across a wide temperature range.\u003c\/p\u003e","brand":"ExxonMobil","offers":[{"title":"Default Title","offer_id":45379659071597,"sku":"M0BIL28-16KG","price":1103.65,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/trked.webp?v=1782486573"},{"product_id":"turbine-engine-oil-5-gallon-pail","title":"Mobil Jet Oil II Synthetic Turbine Engine Oil, 5 Gallon (18.9 L) Pail","description":"\u003cp\u003eMobil Jet™ Oil II was the first standard type II oil on the market. With more than five decades of flight experience, it has accrued over 5 billion hr of on-wing performance. This legendary, hassle-free, second-generation oil helps keep engines clean and operating at peak efficiency. Laboratory tests and engine inspections confirm it can handle extreme speeds, temperatures (up to 204 deg C\/400 deg F) and stresses without breaking down.\u003c\/p\u003e\n\u003ch3\u003eFEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent thermal and oxidation stability\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcellent wear and corrosion protection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRetains viscosity and film-strength across wide temperature range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eChemically stable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLow pour point\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSevere operating conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDeposit control\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFoaming-resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh\/low-temperature viscosity\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL INFORMATION\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMilitary Specification MIL-PRF-23699-STD\u003c\/li\u003e\n\u003cli\u003ePRI-QPL-AS5780\/SPC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContainer Size: 5 gal\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eContainer Type: Pail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eComposition: 1% N-phenyl, Naphthylamine, \u0026lt;0.1% 9, 10-Anthracenedione, 1, 4-Dihydroxy, 1 to \u0026lt;3% Tricresyl Phosphate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eColor: Amber\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eForm: Liquid\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOdor\/Scent: Characteristic\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFlash Point: 518 deg F\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDensity: 1.0035 kg\/L\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEvaporation Rate: 3%, 10.9%, 33.7%\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSpecific Gravity: 1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTemperature Rating: -40 to 400 deg F\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eViscosity: 11000 cSt, 27.6 cSt, 5.1 cSt\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for Use With: Synthetic Gas Turbine Lubricants, All Metals, F Rubber (Viton A), H Rubber (Buna-N) and Silicone Seal Materials\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAPPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAircraft Gas Turbine Engines of the Turbo-Jet\u003c\/li\u003e\n\u003cli\u003eTurbo-Fan\u003c\/li\u003e\n\u003cli\u003eTurbo-Prop\u003c\/li\u003e\n\u003cli\u003eTurbo-Shaft (Helicopter) types used in Commercial\u003c\/li\u003e\n\u003cli\u003eMilitary Service\u003c\/li\u003e\n\u003cli\u003eIndustrial and Marine Applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ExxonMobil","offers":[{"title":"Default Title","offer_id":45418147250285,"sku":"M0BILJETII5GL","price":735.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/m3g.webp?v=1782911387"},{"product_id":"henkel-bonderite-l-gp-gp460-acheson-lubricant-2106140-anti-seize-4-oz-tube","title":"Henkel Bonderite L-GP GP460 Acheson Anti-Seize Lubricant – 4 oz Tube (2106140)","description":"\u003cp\u003eBONDERITE L-GP GP 460 Acheson (known as Acheson GP-460) is an anti-seize lubricant containing high purity graphite in petrolatum. This material is designed to provide long-lasting service over a wide temperature range. It withstands extreme pressure, carries high loads, and reduces friction, galling, and seizing. Acheson GP-460 Approvals and Certifications: Meets the requirements of General Electric (GE) A50TF201 Acheson GP-460 Specifications: Lubricating pigment: graphite Carrier: petrolatum Consistency: paste Solids content: 50%\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColor: Gray\u003c\/li\u003e\n\u003cli\u003eOdor: Slight\u003c\/li\u003e\n\u003cli\u003eLubricating Pigment: Graphite\u003c\/li\u003e\n\u003cli\u003eCarrier: Petrolatum\u003c\/li\u003e\n\u003cli\u003eConsistency: Paste\u003c\/li\u003e\n\u003cli\u003eSolids Content: 50%\u003c\/li\u003e\n\u003cli\u003eDensity: 10.8 lb\/gal (1.29 kg\/l)\u003c\/li\u003e\n\u003cli\u003eBoiling Point\/Range: 300 °C (572 °F)\u003c\/li\u003e\n\u003cli\u003eSpecific Gravity: 1.199\u003c\/li\u003e\n\u003cli\u003eVOC Content: 0 g\/l\u003c\/li\u003e\n\u003cli\u003eFlash Point: 400 °F (200 °C) minimum\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: 1000 °F (538 °C) maximum\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA50TF201\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel Surface Treatments","offers":[{"title":"Default Title","offer_id":45419585077357,"sku":"GP460-40Z","price":119.82,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/mgig.webp?v=1782951159"},{"product_id":"henkel-bonderite-l-gp-460-acheson-anti-seize-1225098-1-pt-can","title":"Henkel Bonderite L-GP GP460 Acheson Anti-Seize Lubricant – 1 Pt Can (1225098)","description":"\u003cp\u003eHenkel Bonderite L-GP 460 Acheson, also known as Acheson GP-460, is an anti-seize lubricant containing high purity graphite in petrolatum. This material is designed to provide long-lasting service over a wide temperature range. It withstands extreme pressure, carries high loads, and reduces friction, galling and seizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePhysical State: Liquid\u003c\/li\u003e\n\u003cli\u003eColor: Gray\u003c\/li\u003e\n\u003cli\u003eOdor: Slight\u003c\/li\u003e\n\u003cli\u003eVapor Pressure: \u0026lt; 1 mm Hg (calculated)\u003c\/li\u003e\n\u003cli\u003eBoiling Point\/Range: 300 °C (572 °F)\u003c\/li\u003e\n\u003cli\u003eMelting Point\/Range: 0 °C (32 °F)\u003c\/li\u003e\n\u003cli\u003eSpecific Gravity: 1.199\u003c\/li\u003e\n\u003cli\u003eFlash Point: 200 °C (392 °F) Pensky Martens closed cup\u003c\/li\u003e\n\u003cli\u003eSolubility in Water: Negligible\u003c\/li\u003e\n\u003cli\u003eVOC Content: 0 g\/l\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGE A50TF201\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel Surface Treatments","offers":[{"title":"Default Title","offer_id":45419585208429,"sku":"GP460PT","price":139.82,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/me9c.webp?v=1782974180"},{"product_id":"ect-r-mc-engine-cleaner-4072-01-1-gal-jug","title":"ECT R-MC Turbine Engine Compressor Wash Cleaner Concentrate 1 Gallon (3.785 L) Jug 4072-01 Mil-C-85704","description":"\u003cp\u003eECT R-MC Engine Cleaner Concentrate is a biodegradable compressor wash for gas turbine engines. The concentrate is mixed at a 6:1 ratio with demineralized water before use and has a pH range of 7.5 to 8.5 for effective surface cleaning without deteriorating finishes. It is supplied as a yellow liquid with a slight sweet odour in a convenient 1-gallon jug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBiodegradable engine cleaner concentrate\u003c\/li\u003e\n\u003cli\u003eFor gas turbine engine compressor washing\u003c\/li\u003e\n\u003cli\u003epH range: 7.5–8.5\u003c\/li\u003e\n\u003cli\u003eHelps clean surfaces without deteriorating finishes\u003c\/li\u003e\n\u003cli\u003eYellow liquid\u003c\/li\u003e\n\u003cli\u003eSlight sweet odour\u003c\/li\u003e\n\u003cli\u003eSupplied in a 1-gallon jug\u003c\/li\u003e\n\u003cli\u003eMeets MIL-C-85704 Type 2A specification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e ECT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e 4072-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Engine Cleaner Concentrate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size:\u003c\/strong\u003e 1 Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH:\u003c\/strong\u003e 7.5–8.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Gravity:\u003c\/strong\u003e 1.03 at 20°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoiling Point:\u003c\/strong\u003e 215°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVapour Pressure:\u003c\/strong\u003e 23.7 mmHg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e MIL-C-85704 Type 2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGas turbine engine compressor washing\u003c\/li\u003e\n\u003cli\u003eSuitable for all makes of gas turbines\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ECT Inc","offers":[{"title":"Default Title","offer_id":45425188405357,"sku":"4072-01","price":181.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/te393c.webp?v=1783157623"},{"product_id":"ect-r-mc-engine-cleaner-4070-05-yellow-5-gal-pail","title":"ECT R-MC Turbine Engine Compressor Wash Cleaner Ready-to-Use 5 Gallon Pail 4070-05 MIL-C-85704","description":"\u003cp\u003eECT R-MC Engine Cleaner is a ready-to-use, biodegradable engine cleaner for gas path and crank-wash cleaning on turbine engines. The pre-mixed formula requires no dilution for most applications and has a pH range of 7.5 to 8.5 for effective cleaning without damaging surface finishes. It is supplied as a yellow, amine-based liquid with a slight sweet amine odour in a 5-gallon pail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReady-to-use pre-mixed formula\u003c\/li\u003e\n\u003cli\u003eNo dilution required for most applications\u003c\/li\u003e\n\u003cli\u003eBiodegradable\u003c\/li\u003e\n\u003cli\u003eNon-toxic\u003c\/li\u003e\n\u003cli\u003eNon-flammable\u003c\/li\u003e\n\u003cli\u003eFor gas path and crank-wash cleaning on turbine engines\u003c\/li\u003e\n\u003cli\u003epH range: 7.5–8.5\u003c\/li\u003e\n\u003cli\u003eCleans without damaging surface finishes\u003c\/li\u003e\n\u003cli\u003eYellow liquid\u003c\/li\u003e\n\u003cli\u003eSlight sweet amine odour\u003c\/li\u003e\n\u003cli\u003eSupplied in a 5-gallon pail\u003c\/li\u003e\n\u003cli\u003eMeets MIL-85704 requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ECT\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 4070-05\u003c\/li\u003e\n\u003cli\u003eProduct Type: Engine Cleaner\u003c\/li\u003e\n\u003cli\u003eFormula: Ready-to-use (pre-mixed)\u003c\/li\u003e\n\u003cli\u003eContainer Size: 5 Gallons\u003c\/li\u003e\n\u003cli\u003eColour: Yellow\u003c\/li\u003e\n\u003cli\u003epH: 7.5–8.5\u003c\/li\u003e\n\u003cli\u003eSpecific Gravity: 1.02 at 20°C\u003c\/li\u003e\n\u003cli\u003eBoiling Point: 215°F\u003c\/li\u003e\n\u003cli\u003eVapour Pressure: 23.7 mm Hg\u003c\/li\u003e\n\u003cli\u003eVapour Density: \u0026gt;1\u003c\/li\u003e\n\u003cli\u003eOdour: Slight sweet amine odour\u003c\/li\u003e\n\u003cli\u003eFormula Type: Amine-based liquid\u003c\/li\u003e\n\u003cli\u003eAverage Cleaning Time: Less than 30 minutes\u003c\/li\u003e\n\u003cli\u003eTechnical Information: Meets MIL-85704 requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGas path cleaning\u003c\/li\u003e\n\u003cli\u003eCrank-wash cleaning\u003c\/li\u003e\n\u003cli\u003eTurbine engines\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ECT Inc","offers":[{"title":"Default Title","offer_id":45425189355629,"sku":"4070-05","price":182.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/wks93.webp?v=1783161556"},{"product_id":"zokman-products®-zok-27-engine-compressor-cleaner-clear-pale-yellow-6-gal-pail-z0k27-6-6gl","title":"ZOK 27 Turbine Engine Compressor Cleaner 25 L Pail Z0K27-6-6GL","description":"\u003cp\u003eZOK 27 Engine Compressor Cleaner is a clear pale yellow cleaner for turbine engine gas path applications. It has a pH range of 7.2 to 7.5 for effective surface cleaning without deteriorating finishes. The cleaner has a specific gravity of 1.01, a boiling point of 100°C at 760 mm Hg, and VOC content below 50 g\/L. It evaporates slowly without leaving residues or stains and is supplied in a 6.6-gallon pail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor turbine engine gas path applications\u003c\/li\u003e\n\u003cli\u003epH range: 7.2–7.5\u003c\/li\u003e\n\u003cli\u003eHelps clean surfaces without deteriorating finishes\u003c\/li\u003e\n\u003cli\u003eVOC content less than 50 g\/L\u003c\/li\u003e\n\u003cli\u003eEvaporates slowly without leaving residues or stains\u003c\/li\u003e\n\u003cli\u003eClear pale yellow liquid\u003c\/li\u003e\n\u003cli\u003eCharacteristic odour\u003c\/li\u003e\n\u003cli\u003eSupplied in a 6.6-gallon pail\u003c\/li\u003e\n\u003cli\u003eStorage temperature: 4°C to 50°C\u003c\/li\u003e\n\u003cli\u003eISO 9001, ISO 14001, and OHSAS 18001 approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Zokman Products\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: ZOK27\u003c\/li\u003e\n\u003cli\u003ePart Number: Z0K27-6-6GL\u003c\/li\u003e\n\u003cli\u003eProduct Type: Engine Compressor Cleaner\u003c\/li\u003e\n\u003cli\u003eContainer Size: 6.6 Gallons (25 L)\u003c\/li\u003e\n\u003cli\u003eColour: Clear pale yellow\u003c\/li\u003e\n\u003cli\u003epH: 7.2–7.5\u003c\/li\u003e\n\u003cli\u003eSpecific Gravity: 1.01\u003c\/li\u003e\n\u003cli\u003eBoiling Point: 100°C at 760 mm Hg\u003c\/li\u003e\n\u003cli\u003eVOC Content: Less than 50 g\/L\u003c\/li\u003e\n\u003cli\u003eOdour: Characteristic\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: 4°C to 50°C\u003c\/li\u003e\n\u003cli\u003eApprovals: ISO 9001, ISO 14001, OHSAS 18001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTurbine engine gas path cleaning\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zokman Products Inc","offers":[{"title":"Default Title","offer_id":45425190436973,"sku":"Z0K27-6-6GL","price":640.72,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/zok27a38e.webp?v=1783164085"},{"product_id":"purogene-40056-antimicrobial-disinfectant-1-quart","title":"Purogene® 40056 Antimicrobial Disinfectant, 1 Quart (946 mL) Bottle","description":"\u003cp\u003eThis antimicrobial disinfectant features a refined blend of oxychloro species that produces chlorine dioxide, effective against various pathogens including E. Coli and Salmonella. The 1 quart bottle treats 50 gallons and is suitable for diverse applications, maintaining equipment and systems while exhibiting low toxicity and corrosion potential.\u003c\/p\u003e\n\u003cp\u003ePurogene is a highly refined blend of oxychloro species containing purified sodium chorite. When activated, chlorine dioxide is produced to greatly enhance antimicrobial activity. Purogene displays broad spectrum antimicrobial activity, proven effective against E. Coli 0157:H7, Salmonella, Listeria, Staphylococcus, Aspergillus and Pseudomonas, Legionella and others. Shown to be efective than other common sanitizers including quaternary ammonia, lodophors, Peracetic acid and sodium hypochlorite (chlorine). The 1 quart bottle of Purogene treats 50 gallons. Four (4) ounces of citric acid or Purogene activator is required. It is recommended to order the box Citric Acid Activator , Each packet is 2 ounces of Activator. Purogene Benefits: Ultra high, broad spectrum antimicrobial activity Uniquely effective against biofilm Effective over a broad pH range (1-10) Low corrosion potential at use concentrations Does not chorinate (no THM formation) Long lasting bacteriostatic activity No effect on organoleptic properties Economical to use Extends the life of on-board water heating and coffee making equipment Maintains lavatory systems free of sludge and organic build-up Can be used with automated delivery systems Approved for use by most major airframe manufacturers Purogene Specifications: Concentration: 2.0-2.10%available chlorine dioxide Appearance: Colourless liquid pH Concentrate of 8.2-8.5 Boiling point: 213°F (100.5°C) Freezing point: 28.9°F (-1.72°C) Solubility in water: Complete Very low acute toxicity (EPA Cat III) Non-Flammable, non-explosive, stable solution NFPA Rating: Dire: 0 Health: 1 Reactivity: 1 Special: None EPA Registration Number: 9804-5\u003c\/p\u003e","brand":"Bio Cide International","offers":[{"title":"Default Title","offer_id":45425431117933,"sku":"PUR0GENEQT","price":61.26,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/m5f.webp?v=1783594086"},{"product_id":"cleaner-777-metal-20l","title":"Triple7 Aircraft \u0026 Metal Cleaner 20L","description":"\u003cp\u003eTriple7 Aircraft \u0026amp; Metal Cleaner is a powerful, bio-based cleaner and degreaser designed for aircraft exteriors, components, and soft metals. This highly concentrated, non-toxic formula effectively removes hydrocarbon soils, staining, and soiling without damaging delicate surfaces. Safe for use on metals, acrylics, glass, rubber, paint, vinyl, and soft metals like aluminium and magnesium, it also protects against tarnish and oxidation.\u003c\/p\u003e\n\u003cp\u003eDefence codified and approved by Boeing, Airbus, and Douglas, Triple7 Aircraft \u0026amp; Metal Cleaner delivers professional-grade cleaning while being safe for workers and the environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-tech, concentrated aircraft cleaner and degreaser\u003c\/li\u003e\n\u003cli\u003eSafe for a wide range of surfaces, including soft metals\u003c\/li\u003e\n\u003cli\u003eRetards tarnish and oxidation\u003c\/li\u003e\n\u003cli\u003eRemoves hydrocarbon soils without harsh chemicals\u003c\/li\u003e\n\u003cli\u003eReadily biodegradable, non-toxic, and non-hazardous\u003c\/li\u003e\n\u003cli\u003eSafe to use, store, and dispose of\u003c\/li\u003e\n\u003cli\u003eApproved by Boeing, Airbus, and Douglas\u003c\/li\u003e\n\u003cli\u003eDefence Codified for Defence applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAircraft manufacture, detailing, and fuselage cleaning\u003c\/li\u003e\n\u003cli\u003eService and maintenance cleaning\u003c\/li\u003e\n\u003cli\u003eEngine cleaning and parts washing\u003c\/li\u003e\n\u003cli\u003eCleaning soft metals, including aluminium and magnesium\u003c\/li\u003e\n\u003cli\u003eAviation workshops and maintenance facilities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNSN Codes (Triple7 MilSpec\u003c\/strong\u003e\u003cstrong\u003eAircraft \u0026amp; Metal)MIL-PRF-87937 Type IV \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6850-66-168-5891 – 20Ltr Drum\u003c\/li\u003e\n\u003cli\u003e6850-66-168-5989 – 200Ltr Drum\u003c\/li\u003e\n\u003cli\u003e6850-66-168-5991 – 1000Ltr Drum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Dilution Rates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy Cleaning Examples – Full Strength up to 1:10\u003c\/strong\u003e\u003cbr\u003eEngine exhaust and carbon black, lubrication greases, landing gear, engine degreasing, parts maintenance, asphalt splatters, hardened resins, insect smears, thick dust and oily dirt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage Cleaning Examples – 1:10 up to 1:20\u003c\/strong\u003e\u003cbr\u003eExterior fuselage cleaning, oily floors, mechanic work areas, tools and support equipment, vehicle maintenance, shipping containers, and utility equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Manufacturing – 1:5 up to 1:40\u003c\/strong\u003e\u003cbr\u003eCleaning parts of cutting oils, polishing rouges, waxes, etc. in parts washers, ultrasonic cleaners, dip or immersion tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Envirofluid Australia","offers":[{"title":"Default Title","offer_id":45425431609453,"sku":"AAAM20LT","price":242.88,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/gwso32.webp?v=1783174100"},{"product_id":"extreme-simple-green-cleaner-0110000413406-clear-5-gallon-pail","title":"Extreme Simple Green Aircraft \u0026 Precision Cleaner - 5 Gallon Pail","description":"\u003cp\u003eExtreme Simple Green Aircraft \u0026amp; Precision Cleaner is a non-corrosive cleaner and degreaser formulated for aircraft and precision cleaning applications. Its clean-rinsing formula combines high soil capacity with superior grease-cutting performance to remove grease, oil, dirt, pollution, insect residue, and impact soils while helping prevent the redeposition of contaminants during rinsing.\u003c\/p\u003e\n\u003cp\u003eThe formula is safe for use on aluminum, carbon fiber, high-tech alloys, structural metals, paints, protective coatings, plastics, hoses, seals, and factory finishes. It contains no corrosive chemicals or reagents that oxidize finishes, cause rust within the fluid, or degrade plastics. Suitable for use with pressure washing equipment, rack wash systems, dip tanks, and parts washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNon-corrosive cleaner and degreaser\u003c\/li\u003e\n\u003cli\u003eDesigned for aircraft and precision cleaning\u003c\/li\u003e\n\u003cli\u003eHigh soil capacity\u003c\/li\u003e\n\u003cli\u003eSuperior grease-cutting performance\u003c\/li\u003e\n\u003cli\u003eClean-rinsing formula helps prevent soil redeposition\u003c\/li\u003e\n\u003cli\u003eRemoves grease, oil, dirt, pollution, insect residue, and impact soils\u003c\/li\u003e\n\u003cli\u003eSafe for aluminum, carbon fiber, high-tech alloys, structural metals, paints, protective coatings, plastics, hoses, seals, and factory finishes\u003c\/li\u003e\n\u003cli\u003eContains no corrosive chemicals\u003c\/li\u003e\n\u003cli\u003eContains no reagents that oxidize finishes, cause rust within the fluid, or degrade plastics\u003c\/li\u003e\n\u003cli\u003eUses a \"triple play\" cleaning formula with two high-performance surfactants and a grease lifter\/cutter\u003c\/li\u003e\n\u003cli\u003eCompatible with pressure washing equipment, rack wash systems, dip tanks, and parts washers\u003c\/li\u003e\n\u003cli\u003eOil separates from solution in oil\/water separators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Simple Green\u003c\/li\u003e\n\u003cli\u003eProduct: Extreme Aircraft \u0026amp; Precision Cleaner\u003c\/li\u003e\n\u003cli\u003eContainer Size: 5 Gallons\u003c\/li\u003e\n\u003cli\u003eProduct Type: Aircraft \u0026amp; Precision Cleaner\u003c\/li\u003e\n\u003cli\u003eFormula: Non-corrosive cleaner and degreaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAircraft cleaning\u003c\/li\u003e\n\u003cli\u003ePrecision cleaning\u003c\/li\u003e\n\u003cli\u003ePressure washing equipment\u003c\/li\u003e\n\u003cli\u003eRack wash systems\u003c\/li\u003e\n\u003cli\u003eDip tanks\u003c\/li\u003e\n\u003cli\u003eParts washers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simple Green","offers":[{"title":"Default Title","offer_id":45425431674989,"sku":"S0100000113405","price":193.45,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/emcio.webp?v=1783168482"},{"product_id":"extreme-simple-green-aircraft-precision-cleaner-946ml","title":"Extreme Simple Green Aircraft \u0026 Precision Cleaner - 946 mL Trigger Spray","description":"\u003cp\u003eExtreme Simple Green Aircraft \u0026amp; Precision Cleaner is a non-corrosive cleaner and degreaser formulated for aircraft and precision cleaning applications. Its clean-rinsing formula combines high soil capacity with superior grease-cutting performance to remove grease, oil, dirt, pollution, insect residue, and impact soils while helping prevent the redeposition of contaminants during rinsing.\u003c\/p\u003e\n\u003cp\u003eThe formula is safe for use on aluminum, carbon fiber, high-tech alloys, structural metals, paints, protective coatings, plastics, hoses, seals, and factory finishes. It contains no corrosive chemicals or reagents that oxidize finishes, cause rust within the fluid, or degrade plastics. Suitable for use with pressure washing equipment, rack wash systems, dip tanks, and parts washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNon-corrosive cleaner and degreaser\u003c\/li\u003e\n\u003cli\u003eDesigned for aircraft and precision cleaning\u003c\/li\u003e\n\u003cli\u003eHigh soil capacity\u003c\/li\u003e\n\u003cli\u003eSuperior grease-cutting performance\u003c\/li\u003e\n\u003cli\u003eClean-rinsing formula helps prevent soil redeposition\u003c\/li\u003e\n\u003cli\u003eRemoves grease, oil, dirt, pollution, insect residue, and impact soils\u003c\/li\u003e\n\u003cli\u003eSafe for aluminum, carbon fiber, high-tech alloys, structural metals, paints, protective coatings, plastics, hoses, seals, and factory finishes\u003c\/li\u003e\n\u003cli\u003eContains no corrosive chemicals\u003c\/li\u003e\n\u003cli\u003eContains no reagents that oxidize finishes, cause rust within the fluid, or degrade plastics\u003c\/li\u003e\n\u003cli\u003eUses a \"triple play\" cleaning formula with two high-performance surfactants and a grease lifter\/cutter\u003c\/li\u003e\n\u003cli\u003eCompatible with pressure washing equipment, rack wash systems, dip tanks, and parts washers\u003c\/li\u003e\n\u003cli\u003eOil separates from solution in oil\/water separators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Simple Green\u003c\/li\u003e\n\u003cli\u003eProduct: Extreme Aircraft \u0026amp; Precision Cleaner\u003c\/li\u003e\n\u003cli\u003eContainer Size: 946 mL \/ 32 oz\u003c\/li\u003e\n\u003cli\u003eProduct Type: Aircraft \u0026amp; Precision Cleaner\u003c\/li\u003e\n\u003cli\u003eFormula: Non-corrosive cleaner and degreaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAircraft cleaning\u003c\/li\u003e\n\u003cli\u003ePrecision cleaning\u003c\/li\u003e\n\u003cli\u003ePressure washing equipment\u003c\/li\u003e\n\u003cli\u003eRack wash systems\u003c\/li\u003e\n\u003cli\u003eDip tanks\u003c\/li\u003e\n\u003cli\u003eParts washers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simple Green","offers":[{"title":"Default Title","offer_id":45425431740525,"sku":"S0110001213412","price":28.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/34mdi.webp?v=1783170929"},{"product_id":"castrol-brayco-599-turbine-engine-corrosion-preventative-concentrate-8-oz","title":"Castrol Brayco® 599 Turbine Engine Corrosion Preventative Concentrate, 8 oz (237 mL)","description":"\u003cp\u003eBrayco 599 is designed for use as an additive for turbine engines and helicopter transmissions that use MIL-PRF-23699F lubricating oil. Brayco 599 should be added to the oil sump immediately after an oil change when the equipment is intended to be placed in storage, especially in locations where high humidity and salt spray are present. The corrosion inhibited oil should be capable of limited use not to exceed 25 hours. Please consult the engine manufacturer's manual to determine specific engine model recommendations and\/or limitations.\u003c\/p\u003e\n\u003cp\u003eTo receive full protection for extended equipment storage, Castrol recommends addition of Brayco 599 in concentrations between 10% and 15% by volume. Lower concentrations between 5% and 10% may be suitable for some component storage applications depending upon storage conditions and length of storage. Please consult the engine manufacturer's maintenance manual or service bulletin to determine specific engine model dilution ratio recommendations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: 27002AECZ\u003c\/li\u003e\n\u003cli\u003eManufacturer: Castrol Industrial®\u003c\/li\u003e\n\u003cli\u003eForm: Liquid Concentrate\u003c\/li\u003e\n\u003cli\u003eColour: Dark Amber\u003c\/li\u003e\n\u003cli\u003eContainer Size: 8 oz\u003c\/li\u003e\n\u003cli\u003eBase Fluid: Synthetic\u003c\/li\u003e\n\u003cli\u003eCompatibility: MIL-PRF-23699F synthetic turbine oils\u003c\/li\u003e\n\u003cli\u003eRecommended Concentration: 10–15% by volume for extended storage\u003c\/li\u003e\n\u003cli\u003eMaximum Operational Hours: 25 hours (as an additive)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor use in MIL-PRF-23699F synthetic turbine oils at 10–15% volume addition for storage\u003c\/li\u003e\n\u003cli\u003eMeets General Electric Aircraft Engine Group Specification D50TF6-S1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Castrol Industrial","offers":[{"title":"Default Title","offer_id":45443401384045,"sku":"27002AECZ","price":74.9,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/nuwsdi.webp?v=1783597412"},{"product_id":"dow-dowsil-730-fs-solvent-resistant-sealant-90-ml","title":"Dow DOWSIL 730 FS Solvent Resistant Sealant, White Fluorosilicone, 90 mL Tube, RTV730FS30Z","description":"\u003cp\u003eDOWSIL 730 FS Solvent Resistant Sealant is a one-component, solventless, non-slumping fluorosilicone rubber paste that cures at room temperature on exposure to moisture in the air. It is used for bonding, sealing and caulking where resistance to the swelling effects of fuels, oils and solvents is needed, including fuel systems, tanks and formed-in-place gaskets.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAcetoxy cure system; releases some acetic acid during cure\u003c\/li\u003e\n\u003cli\u003eCures to a tough, flexible rubber with good adhesion to many substrates\u003c\/li\u003e\n\u003cli\u003eStable and flexible from -65°C (-85°F) to 260°C (500°F)\u003c\/li\u003e\n\u003cli\u003eSkins over in about 12 minutes and cures to a depth of about 3 mm in 24 hours at room temperature and 50% relative humidity\u003c\/li\u003e\n\u003cli\u003eSupplied as a 90 mL tube with nozzle included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dow","offers":[{"title":"Default Title","offer_id":45912427954285,"sku":"RTV730FS30Z","price":329.07,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/RTV730FS30Z.webp?v=1790383189"},{"product_id":"eastman-skydrol-ld-4-type-iv-fire-resistant-aviation-hydraulic-fluid-5-gallon-ld4-5gl","title":"Eastman Skydrol LD-4 Type IV Fire Resistant Aviation Hydraulic Fluid, 5 Gallon, LD4-5GL","description":"\u003cp\u003eSkydrol LD-4 is a Type IV, low density, phosphate ester based fire resistant hydraulic fluid for aircraft hydraulic systems. It contains an anti-erosion additive and an acid scavenger to prevent valve erosion and control deposits. Supplied as one 5 gallon pail.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntroduced in 1977; Eastman states the formulation has not changed since its introduction\u003c\/li\u003e\n\u003cli\u003eEastman lists approvals from Airbus, Boeing, Bombardier, Embraer, Gulfstream, Cessna and others (see specifications); not approved for the Airbus A350, A380 or Boeing 787\u003c\/li\u003e\n\u003cli\u003eViscosity 10.65 to 11.65 cSt at 38 °C and 2000 cSt maximum at -54 °C\u003c\/li\u003e\n\u003cli\u003eFire point 177 °C (350 °F) minimum and autoignition temperature 400 °C (752 °F) minimum\u003c\/li\u003e\n\u003cli\u003eApprovals change over time; confirm against the aircraft CMM or QPL before use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eastman","offers":[{"title":"Default Title","offer_id":45912429690989,"sku":"LD4-5GL","price":2242.51,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/dsafg.webp?v=1791034815"},{"product_id":"3m-ptfe-glass-cloth-tape-5453-brown-1-in-x-36-yd-8-2-mil-021200-16160","title":"3M PTFE Glass Cloth Tape 5453, Brown, 1 in x 36 yd, 8.2 mil, 021200-16160","description":"\u003cp\u003e3M PTFE Glass Cloth Tape 5453 is a brown woven glass cloth tape impregnated with PTFE, with a pressure sensitive silicone adhesive. It gives a non-stick, low friction surface on heat sealing and packaging equipment and is used as a mould release surface in composite bonding. Supplied as a single 1 in x 36 yd roll.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGlass cloth backing resists tears and punctures better than PTFE film backed tapes\u003c\/li\u003e\n\u003cli\u003eVery low moisture absorption and resistance to most chemicals\u003c\/li\u003e\n\u003cli\u003eAlso used to line chutes and ducts, cover rollers and drums, for high temperature bundling and to separate dissimilar parts\u003c\/li\u003e\n\u003cli\u003eWound on a 3 in core\u003c\/li\u003e\n\u003cli\u003eDo not heat above 316 °C (600 °F): PTFE can release harmful vapours\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":45912430084205,"sku":"021200-16160","price":533.31,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/021200-16160-A.webp?v=1791115071"},{"product_id":"royco-481-turbine-engine-oil-and-preservative-mil-prf-6081d-grade-1010-and-1010n-5-gallon-pail-481-5gl","title":"Royco 481 Turbine Engine Oil and Preservative, MIL-PRF-6081D Grade 1010 and 1010N, 5 Gallon Pail, 481-5GL","description":"\u003cp\u003eRoyco 481 is a mineral oil based lubricant for gas turbine engine components. It is also used as a flushing and preservative fluid for aircraft fuel systems and components, and may be considered as the primary turbine engine lubricant in many aircraft turbine engines designed to run on mineral based lubricants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOxidation and corrosion protection with ashless additive technology\u003c\/li\u003e\n\u003cli\u003eHigh viscosity index for low and high temperature fluidity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Royco","offers":[{"title":"Default Title","offer_id":45913686507629,"sku":"481-5GL","price":433.07,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/481-5GL_2U_0_1600.jpg?v=1791441917"},{"product_id":"ppg-pr-1422-class-b-1-2-fuel-tank-sealant-1-2-hour-application-life-two-part-kit-pr1422b1-2pt","title":"PPG PR-1422 Class B-1\/2 Fuel Tank Sealant, 1\/2 Hour Application Life, Two-Part Kit, PR1422B1-2PT","description":"\u003cp\u003ePR-1422 Class B is a two-part, dichromate cured polysulfide sealant for aircraft integral fuel tanks. It is a low sag paste applied by extrusion gun or spatula for fillet sealing of fuel tanks and other aircraft fuselage sealing applications. The B-1\/2 grade has a 1\/2 hour application life at 77°F (25°C), 50% RH.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCures at room temperature to a resilient sealant with adhesion to common aircraft substrates\u003c\/li\u003e\n\u003cli\u003eCured sealant retains its elastomeric properties after prolonged exposure to jet fuel and aviation gas\u003c\/li\u003e\n\u003cli\u003eMixing ratio by weight, Part A:Part B, 13.3:100\u003c\/li\u003e\n\u003cli\u003eFor industrial use only; read the Safety Data Sheet before use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45913688375405,"sku":"PR1422B1-2PT","price":332.68,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/PR1422B1-2PT.webp?v=1791290489"},{"product_id":"eastman-skydrol-ld-4-aviation-hydraulic-fluid-1-gal","title":"Eastman Skydrol LD-4 Aviation Hydraulic Fluid, 1 US Gallon \/ 3.78L","description":"\u003cp\u003eSkydrol LD-4 is a Type IV fire resistant hydraulic fluid for aircraft hydraulic systems. It was introduced in 1977 and is formulated for low density, thermal stability, valve erosion prevention and deposit control. Supplied in a 1 US gallon (3.78 litre) can.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eContains an anti-erosion additive and acid scavenger\u003c\/li\u003e\n\u003cli\u003eApproved by Airbus (not A350 or A380), Bombardier, Embraer, Gulfstream, Cessna and other airframe manufacturers\u003c\/li\u003e\n\u003cli\u003eClear, oily liquid, purple in colour\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eastman","offers":[{"title":"Default Title","offer_id":45913688604781,"sku":"LD4GL","price":503.69,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/LD4GL.webp?v=1790223308"},{"product_id":"ppg-aerospace-pr-1422-class-b-2-fuel-tank-sealant-pint-kit-pr1422b2pt","title":"PPG Aerospace PR-1422 Class B-2 Fuel Tank Sealant, Pint Kit, PR1422B2PT","description":"\u003cp\u003ePR-1422 Class B is a two-part, dichromate cured polysulfide aircraft integral fuel tank sealant. It is for fillet sealing of fuel tanks and other aircraft fuselage sealing, and the cured sealant keeps its elastomeric properties after prolonged exposure to jet fuel and aviation gas.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow sag, thixotropic paste applied by extrusion gun or spatula\u003c\/li\u003e\n\u003cli\u003eCures at room temperature and adheres to common aircraft substrates\u003c\/li\u003e\n\u003cli\u003eTack free in under 20 hours, 35 Durometer A in 36 hours at 77°F (25°C), 50% RH\u003c\/li\u003e\n\u003cli\u003eMix ratio 13.3:100 Part A to Part B by weight\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45913688735853,"sku":"PR1422B2PT","price":332.68,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/PR1422B2PT.webp?v=1791290960"},{"product_id":"ppg-p-s-890-class-b-2-aircraft-fuel-tank-sealant-1-pint-kit-ps890b2pt","title":"PPG P\/S 890 Class B-2 Aircraft Fuel Tank Sealant, 1 Pint Kit, PS890B2PT","description":"\u003cp\u003eP\/S 890 Class B is a two-part, manganese dioxide cured polysulfide aircraft integral fuel tank sealant. It is designed for fillet sealing of fuel tanks and other aircraft fuselage sealing and cures at room temperature. Class B-2 has a 2 hour application life.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow sag, thixotropic paste for application by extrusion gun or spatula\u003c\/li\u003e\n\u003cli\u003eMaintains elastomeric properties after prolonged exposure to jet fuel and aviation gas\u003c\/li\u003e\n\u003cli\u003eMixing ratio 10:100 Part A to Part B by weight\u003c\/li\u003e\n\u003cli\u003eRepairable to itself on freshly cured and fuel aged fillets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45913689030765,"sku":"PS890B2PT","price":338.4,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/PS890B2PT.webp?v=1791291308"},{"product_id":"royco-756-aviation-hydraulic-fluid-mil-prf-5606j-5-gallon-pail-756-5gl","title":"Royco 756 Aviation Hydraulic Fluid, MIL-PRF-5606J, 5 Gallon Pail, 756-5GL","description":"\u003cp\u003eRoyco 756 is a red-dyed, mineral oil based aviation hydraulic fluid qualified under MIL-PRF-5606J. It is made for aircraft, missile, autopilot and shock absorber hydraulic systems, and for cherry pickers, boom trucks, robotics and other industrial equipment needing all-weather performance. Supplied in a 5 gallon pail.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdditives provide low temperature fluidity, anti-wear performance, oxidation and corrosion inhibition, and shear stability\u003c\/li\u003e\n\u003cli\u003eContains metal deactivators and foam inhibitors\u003c\/li\u003e\n\u003cli\u003eA \"super clean\" fluid for systems where fluid cleanliness can contribute to component life and reliability\u003c\/li\u003e\n\u003cli\u003ePour point -66°C (ASTM D97)\u003c\/li\u003e\n\u003cli\u003eDo not use in systems with natural rubber seals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Royco","offers":[{"title":"Default Title","offer_id":45913689292909,"sku":"756-5GL","price":553.61,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/756-5GL_2U_0_1600.jpg?v=1791441929"},{"product_id":"ppg-aerospace-pr-1828-b-1-2-rapid-curing-fuel-tank-sealant-semkit-cartridge-pr1828b1-2","title":"PPG Aerospace PR-1828 B-1\/2 Rapid Curing Fuel Tank Sealant, Semkit Cartridge, PR1828B1-2","description":"\u003cp\u003ePR-1828 Class B is a two-part, epoxy cured Permapol P-3 polythioether sealant for aircraft integral fuel tanks. It is designed for fillet sealing of fuel tanks and other aircraft fuselage sealing applications, and the cured sealant keeps its elastomeric properties after prolonged exposure to jet fuel and aviation gas. This B-1\/2 version is supplied as a Semkit two-part cartridge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMixed, uncured material is a low sag, thixotropic paste applied by extrusion gun or spatula\u003c\/li\u003e\n\u003cli\u003eCures at temperatures as low as 5°C (41°F) and is unaffected by changes in relative humidity\u003c\/li\u003e\n\u003cli\u003eLow-temperature flexibility at -65°C (-85°F) with no cracking, checking or loss of adhesion\u003c\/li\u003e\n\u003cli\u003eRepairable to freshly cured sealant and to fuel-aged abraded fillets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45913689948269,"sku":"PR1828B1-2","price":477.76,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/PR1828B1-2.webp?v=1791290051"},{"product_id":"ppg-p-s-870-class-b-2-corrosion-inhibitive-sealant-1-pint-kit-ps870b2pt","title":"PPG P\/S 870 Class B-2 Corrosion Inhibitive Sealant, 1 Pint Kit, PS870B2PT","description":"\u003cp\u003ePPG P\/S 870 Class B-2 is a two-part, manganese dioxide cured polysulfide sealant with corrosion inhibitive properties. It acts as a barrier against the common causes of corrosion on aluminium alloys or between dissimilar metals. The uncured material is a low sag, thixotropic paste applied by extrusion gun or spatula, and it cures at room temperature with adhesion to common aircraft substrates.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCured sealant maintains elastomeric properties after limited exposure to jet fuel and aviation gas\u003c\/li\u003e\n\u003cli\u003eRepairable to itself on both fresh cured and fuel aged fillets\u003c\/li\u003e\n\u003cli\u003eSalt spray (fog) test for 670 hours (ASTM B117) with no corrosion to base substrate or deterioration of sealant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPG","offers":[{"title":"Default Title","offer_id":45913692569709,"sku":"PS870B2PT","price":476.38,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/PS870B2PT_5N_0_1600.jpg?v=1791441936"},{"product_id":"3m-polyurethane-protective-tape-8671-transparent-2-in-x-36-yd-roll-021200-24343","title":"3M Polyurethane Protective Tape 8671, Transparent, 2 in x 36 yd Roll, 021200-24343","description":"\u003cp\u003e3M Polyurethane Protective Tape 8671 is a 14 mil leading edge erosion protection tape with a polyurethane backing and an acrylic adhesive. It is used in aircraft production and maintenance to protect surfaces from rain and sand erosion, abrasion, scratching and minor impact damage.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePolyurethane backing resists punctures, tearing, abrasion and erosion, and is formulated to resist ultraviolet light\u003c\/li\u003e\n\u003cli\u003eThin and conformable, follows curved surfaces\u003c\/li\u003e\n\u003cli\u003eCan be painted over or applied to painted surfaces\u003c\/li\u003e\n\u003cli\u003eAcrylic adhesive holds a constant level of adhesion over time and removes when required\u003c\/li\u003e\n\u003cli\u003eMade under a 3M quality management system registered to AS9100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":45913693061229,"sku":"021200-24343","price":669.08,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/021200-24343.webp?v=1791296252"},{"product_id":"krytox-240ac-aerospace-grade-pfpe-grease-mil-prf-27617-type-iii-2-oz-tube-240ac20z","title":"Krytox 240AC Aerospace Grade PFPE Grease, MIL-PRF-27617 Type III, 2 oz Tube, 240AC20Z","description":"\u003cp\u003eKrytox 240AC is a white, NLGI 2 fluorinated grease made by Chemours from perfluoropolyether (PFPE) oil thickened with PTFE. It is qualified to MIL-PRF-27617 Type III. Chemours lists airframe uses from engine mounts to fighter canopy slide rollers and aircraft seat adjuster mechanisms.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNonflammable and chemically inert; liquid oxygen impact test: no reaction\u003c\/li\u003e\n\u003cli\u003eSilicone free; compatible with metals, elastomers, plastics, paints, finishes and a broad range of O-ring materials\u003c\/li\u003e\n\u003cli\u003eBase oil viscosity 270 cSt at 38 °C\u003c\/li\u003e\n\u003cli\u003eNSF H-1 listed for incidental food contact\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Krytox","offers":[{"title":"Default Title","offer_id":45913694011501,"sku":"240AC20Z","price":590.73,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/240AC20Z_C1_0_1600.jpg?v=1791441942"},{"product_id":"castrol-aero-40-landing-gear-shock-strut-fluid-bms-3-32c-type-ii-5-us-gallon-27027bepl","title":"Castrol Aero 40 Landing Gear Shock Strut Fluid, BMS 3-32C Type II, 5 US Gallon, 27027BEPL","description":"\u003cp\u003eCastrol Aero 40 is a mineral based MIL-H-5606 hydraulic fluid for aircraft landing gear shock struts. This undyed, straw coloured grade is made to specification BMS 3-32C, Type II.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eContains a shear stable viscosity index improver, an anti-oxidant, anti-wear agents and an approved EP additive\u003c\/li\u003e\n\u003cli\u003eEP additive reduces martensitic streaking of landing gear outer cylinders and galling of shock strut upper bearings\u003c\/li\u003e\n\u003cli\u003eCompatible with approved MIL-PRF-6083 and other MIL-H-5606 qualified hydraulic fluids\u003c\/li\u003e\n\u003cli\u003eCompatible with seals, hoses and paints normally used in shock struts and dispensing equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Castrol Industrial","offers":[{"title":"Default Title","offer_id":45913698205805,"sku":"27027BEPL","price":418.2,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/27027BEPL.webp?v=1791285121"},{"product_id":"royco-81ms-synthetic-high-temperature-molybdenum-disulfide-silicone-lubricant-1-75-lb-can-81ms1-75lb","title":"Royco 81MS Synthetic High Temperature Molybdenum Disulfide Silicone Lubricant, 1.75 lb Can, 81MS1-75LB","description":"\u003cp\u003eRoyco 81MS is a homogeneous, high-temperature semi-fluid lubricant with micro-fine molybdenum disulfide (MoS2) in a thermally stable methyl phenyl polysiloxane synthetic oil. It is designed for slow speed sliding metal on metal surfaces at temperatures up to 400°C (~750°F), as found in aircraft gas turbine engines, and may also be used as an anti-seize compound on threaded parts up to 760°C (~1400°F).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplied by paint brush, squirt can or pressure applicator\u003c\/li\u003e\n\u003cli\u003eMoS2 particles adhere to and penetrate metal surfaces, giving lubrication and anti-seize protection even when the oil component is removed\u003c\/li\u003e\n\u003cli\u003eStir well immediately before using\u003c\/li\u003e\n\u003cli\u003eDifficult to remove from surfaces and may stain yellow metals; use on antifriction bearings has not been investigated\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Royco","offers":[{"title":"Default Title","offer_id":45913707446381,"sku":"81MS1-75LB","price":556.62,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/81MS1-75LB_2U_0_1600.jpg?v=1791441974"},{"product_id":"orcon-orcotape-ot-40n-double-sided-aircraft-carpet-tape-2-in-x-60-yd-21000-2x60hb","title":"Orcon Orcotape OT-40N Double-Sided Aircraft Carpet Tape, 2 in x 60 yd, 21000-2X60HB","description":"\u003cp\u003eOrcotape OT-40N is a lightweight double-sided pressure-sensitive reinforced polyester tape with differential tack. It is used to adhere aircraft floor coverings such as carpet, padding and galley mats to aircraft flooring, and leaves no residue when removed from the floor surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSide 1 (dark grey) adheres to the floor; Side 2 (black, with release liner) adheres to the carpet backing\u003c\/li\u003e\n\u003cli\u003eFlammability, tape only: passes FAR Part 25 App. F Part I vertical burn test (12 seconds) and BSS7230 Method F2\u003c\/li\u003e\n\u003cli\u003eComplies with EU REACH, US EPA, BDM-1712 and RoHS environmental requirements\u003c\/li\u003e\n\u003cli\u003eReplaces Orcotape OT-40\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orcon","offers":[{"title":"Default Title","offer_id":45913713148013,"sku":"21000-2X60HB","price":338.6,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/21000-2X60HB_C5_0_1600.jpg?v=1791441994"},{"product_id":"3m-aerospace-sealant-ac-350-b-1-2-fuel-tank-and-fuselage-pint-kit-051141-58048","title":"3M Aerospace Sealant AC-350 B-1\/2, Fuel Tank and Fuselage, Pint Kit, 051141-58048","description":"\u003cp\u003e3M Aerospace Sealant AC-350 Class B-1\/2 is a fast cure, intermediate density, two-component polysulfide sealant for sealing and repairing integral fuel tanks and sealing fuselages. It is manganese dioxide cured and solvent free, and resists aviation gasoline, jet fuel and the chemicals and petroleum products common to the aircraft industry. Supplied as a two-part pint kit (base and catalyst).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eClass B-1\/2: minimum application life 30 minutes, typical tack-free and cure time 2 to 3 hours at 77°F and 50% relative humidity\u003c\/li\u003e\n\u003cli\u003eMaintains flexibility and bond strength on aluminium, titanium, steel, stainless steel, glass and many coatings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":45913713410157,"sku":"051141-58048","price":406.94,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/051141-58048.webp?v=1791284174"},{"product_id":"castrol-brayco-460-jet-engine-lubricating-oil-mil-prf-6081e-grade-1010-5-us-gallons-27014aepl","title":"Castrol Brayco 460 Jet Engine Lubricating Oil, MIL-PRF-6081E Grade 1010, 5 US Gallons, 27014AEPL","description":"\u003cp\u003eCastrol Brayco 460 is a petroleum-based jet engine lubricating oil made from a highly refined mineral base oil. It is designed for older jet engines and other high-speed turbines that require this type of petroleum-based turbine oil, and may also be used in other applications that need low temperature operation and good viscosity behaviour.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIdentified by NATO code O-133\u003c\/li\u003e\n\u003cli\u003eSpecific gravity 0.88 at 15°C (typical)\u003c\/li\u003e\n\u003cli\u003eColour under 1.0 on the ASTM D1500 scale (typical)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Castrol Industrial","offers":[{"title":"Default Title","offer_id":45913796083821,"sku":"27014AEPL","price":376.36,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/27014AEPL.webp?v=1791282979"},{"product_id":"3m-high-temperature-aluminum-foil-glass-cloth-tape-363-silver-2-in-x-36-yd-021200-17295","title":"3M High Temperature Aluminum Foil\/Glass Cloth Tape 363, Silver, 2 in x 36 yd, 021200-17295","description":"\u003cp\u003e3M High Temperature Aluminum Foil\/Glass Cloth Tape 363 is a silver tape with an aluminium foil backing laminated to glass cloth and a transparent silicone adhesive. It is used as a heat reflective protective wrap over cables, instruments and other high temperature sensitive materials in aerospace and industrial applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePerforms continuously from -65°F (-54°C) to 600°F (316°C)\u003c\/li\u003e\n\u003cli\u003eMeets the requirements of FAR 25.853(a)\u003c\/li\u003e\n\u003cli\u003eLight, flexible construction for irregular shapes\u003c\/li\u003e\n\u003cli\u003eCan be die-cut into special sizes or shapes\u003c\/li\u003e\n\u003cli\u003eBest results when applied to a clean dry surface above 32°F (0°C)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":45913796345965,"sku":"021200-17295","price":819.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/021200-17295.webp?v=1791295908"},{"product_id":"castrol-brayco-micronic-881-low-temperature-hydraulic-fluid-mil-prf-87257-5-us-gal-18-9-l-27020aepl","title":"Castrol Brayco Micronic 881 Low Temperature Hydraulic Fluid, MIL-PRF-87257, 5 US gal (18.9 L), 27020AEPL","description":"\u003cp\u003eCastrol Brayco Micronic 881 is a fire resistant, synthetic hydrocarbon base, ISO viscosity grade 7 hydraulic fluid, red in colour, for aircraft, missile, ordnance and industrial hydraulic systems. It is designed for low temperature applications where low temperature stability is important, and is qualified to MIL-PRF-87257. Supplied in a 5 US gallon pail.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eControlled rubber swell for long seal life\u003c\/li\u003e\n\u003cli\u003eLow foaming, with anti-wear, corrosion protection and oxidation stability\u003c\/li\u003e\n\u003cli\u003ePour point -66°C (-85°F)\u003c\/li\u003e\n\u003cli\u003ePasses 72 hour low temperature stability at -54°C (FTM 3465)\u003c\/li\u003e\n\u003cli\u003eKinematic viscosity 7.2 mm²\/s at 40°C, 492 mm²\/s at -40°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Castrol Industrial","offers":[{"title":"Default Title","offer_id":45913798410349,"sku":"27020AEPL","price":632.83,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/27020AEPL.webp?v=1791283725"},{"product_id":"3m-polyurethane-protective-tape-8671-transparent-4-in-x-36-yd-roll-021200-39346","title":"3M Polyurethane Protective Tape 8671, Transparent, 4 in x 36 yd Roll, 021200-39346","description":"\u003cp\u003e3M Polyurethane Protective Tape 8671 is a 14 mil leading edge erosion protection tape with a transparent thermoplastic polyurethane backing and an acrylic adhesive. It is applied in aircraft production and maintenance to protect surfaces from rain and sand erosion, abrasion and minor impact damage.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for resistance to ultraviolet light\u003c\/li\u003e\n\u003cli\u003eBacking resists abrasion, scratches, erosion, tearing and punctures\u003c\/li\u003e\n\u003cli\u003eThin and conformable, applies over curved surfaces\u003c\/li\u003e\n\u003cli\u003eCan be painted over or applied to painted surfaces\u003c\/li\u003e\n\u003cli\u003eSolvent-resistant acrylic adhesive, removes easily when required\u003c\/li\u003e\n\u003cli\u003eMade under a 3M quality management system registered to AS9100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":45913800835181,"sku":"021200-39346","price":1338.19,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/021200-39346.webp?v=1791296650"},{"product_id":"donaldson-afs-air-filter-cleaner-for-inlet-barrier-filters-5-gallon-100205-000","title":"Donaldson AFS Air Filter Cleaner for Inlet Barrier Filters, 5 Gallon, 100205-000","description":"\u003cp\u003eDonaldson AFS Filter Cleaner in a 5 gallon container. It is the cleaner named in Donaldson AFS inlet barrier filter (IBF) servicing instructions for cleaning filter media before the filter is dried and re-oiled with AFS Air Filter Oil.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSprayed onto both sides of the filter media, left to soak for 10 minutes, then rinsed with low-pressure water; Donaldson advises decanting bulk product into a spray bottle\u003c\/li\u003e\n\u003cli\u003eDonaldson permits only AFS cleaner or an AFS approved substitute; solvents, strong detergents, caustic cleaners, steam and pressure washers damage the media\u003c\/li\u003e\n\u003cli\u003eNot classified as hazardous under GHS (US); not a regulated dangerous good for air or sea transport (Donaldson SDS)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Donaldson","offers":[{"title":"Default Title","offer_id":45913801916525,"sku":"100205-000","price":660.78,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/100205-000_K3_0_1600.jpg?v=1790022165"},{"product_id":"3m-polyurethane-protective-tape-8672-transparent-2-in-x-36-yd-021200-39347","title":"3M Polyurethane Protective Tape 8672, Transparent, 2 in x 36 yd, 021200-39347","description":"\u003cp\u003e3M Polyurethane Protective Tape 8672 is a transparent 8 mil leading edge erosion protection tape: an abrasion resistant polyurethane elastomer film with a pressure-sensitive acrylic adhesive on an easy-release polyester liner. It resists punctures, tearing, abrasion and erosion, and is formulated for resistance to ultraviolet light.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProtects a surface from corrosion, abrasion and minor impact damage\u003c\/li\u003e\n\u003cli\u003eCan be painted or applied over painted surfaces\u003c\/li\u003e\n\u003cli\u003eInstalls with simple tools\u003c\/li\u003e\n\u003cli\u003eTypical tensile strength 40 lb\/in (700 N\/100 mm), 500% elongation, peel adhesion to bare aluminium 60 oz\/in (66 N\/100 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":45913802408045,"sku":"021200-39347","price":475.75,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/021200-39347_27_0_1600.jpg?v=1791442013"},{"product_id":"3m-polyurethane-protective-tape-8671-transparent-3-in-x-36-yd-roll-021200-24344","title":"3M Polyurethane Protective Tape 8671, Transparent, 3 in x 36 yd Roll, 021200-24344","description":"\u003cp\u003e3M Polyurethane Protective Tape 8671 is a 14 mil leading edge erosion protection tape with a polyurethane backing and an acrylic adhesive. It is used in aircraft production and maintenance to protect surfaces from rain and sand erosion, abrasion, scratching and minor impact damage.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePolyurethane backing resists punctures, tearing, abrasion, erosion and ultraviolet light\u003c\/li\u003e\n\u003cli\u003eThin and conformable over curved surfaces\u003c\/li\u003e\n\u003cli\u003eCan be painted over or applied to painted surfaces\u003c\/li\u003e\n\u003cli\u003eAcrylic adhesive keeps a constant level of adhesion over time and removes when required\u003c\/li\u003e\n\u003cli\u003eMade under a 3M quality management system registered to AS9100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":45913806110829,"sku":"021200-24344","price":1003.63,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/021200-24344_27_0_1600.jpg?v=1791442025"},{"product_id":"henkel-bonderite-m-cr-1132-aero-touch-n-prep-chromate-conversion-coating-pen-alodine-1132-1445846","title":"Henkel BONDERITE M-CR 1132 AERO Touch-N-Prep Chromate Conversion Coating Pen (Alodine 1132), 1445846","description":"\u003cp\u003eBONDERITE M-CR 1132 AERO is a one-part, dry-in-place chromate conversion coating in a touch-up applicator pen, also known as ALODINE 1132 TOUCH-N-PREP. It is used to touch up and repair conversion coatings on clean, oxide-free aluminium and aluminium alloy surfaces before priming or painting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo rinsing: the coating dries in place\u003c\/li\u003e\n\u003cli\u003eLeaves a golden protective coating on aluminium and aluminium alloys\u003c\/li\u003e\n\u003cli\u003eMilitary specification approved: MIL-DTL-81706 Class 1A and Class 3 on aluminium and aluminium alloys, applied as two coats at 90 degrees\u003c\/li\u003e\n\u003cli\u003eReduces worker contact with chromating solutions and rinse-water waste\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel","offers":[{"title":"Default Title","offer_id":45913809387629,"sku":"1445846","price":333.91,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/1445846_m1.webp?v=1793272871"}],"url":"https:\/\/www.pilotgear.com.au\/en-vn\/collections\/wholesale-range-consumables.oembed","provider":"Pilot Gear","version":"1.0","type":"link"}