{"product_id":"cleco-1-8-fabrication-shop-kit","title":"Cleco 1\/8\" Fabrication Shop Kit - 50 Fasteners, 10 Side Grip Clamps, 8 Butt Weld Clamps \u0026 Pliers","description":"\u003cp\u003eFifty 1\/8\" cleco fasteners, ten side grip clamps, eight butt welding clamps and the pliers that drive the fasteners and the side grips. The full set for a panel shop or a restoration, holding sheet metal by the hole, by the edge and edge to edge.\u003c\/p\u003e\n\u003cp\u003eThe cleco fasteners are spring loaded temporary rivets. Drill a #30 (3.2 mm) hole through both sheets, compress a cleco in the pliers, push it in and release. It pulls the sheets together and holds them until you take it out again.\u003c\/p\u003e\n\u003cp\u003eThe side grip clamps use the same pliers and need no hole. Compress the pliers to open the jaws, set the clamp over the panel edge or flange, and release. The five copper clamps open to 1\/2\" for two or three sheets, the five brass clamps open to 3\/4\" for thicker stacks, and both grip without marking or overtightening.\u003c\/p\u003e\n\u003cp\u003eThe butt welding clamps hold two panels edge to edge and level for a butt joint. Slide one over both edges, wind it closed until the faces sit flush, tack between the clamps, then remove them and finish the weld. Everything in the kit is reusable.\u003c\/p\u003e","brand":"Cleco","offers":[{"title":"Default Title","offer_id":45897782198381,"sku":"AT552M-50-FAB-KIT","price":18449.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/2041\/4573\/files\/AT552M-50-FAB-KIT.webp?v=1790249153","url":"https:\/\/www.pilotgear.com.au\/ja-jp\/products\/cleco-1-8-fabrication-shop-kit","provider":"Pilot Gear","version":"1.0","type":"link"}